top of page

cmb components

Caulking

Roll of butyl caulking tape used to create weather-resistant seals between steel building panels.

1/8" x 1" Caulking Tape

Roll of butyl caulking tape used to create weather-resistant seals between steel building panels.

1/8" x 1/2" Caulking Tape

Construction-grade sealant tubes used to weatherproof joints, seams, and penetrations in steel buildings.

Tube Caulking - 10 ct.

bent parts

Ridge Trim - 20' 2" length

Gutter Trim - 20' 2" length

Cross-sectional drawing of an eave trim used along the roof edge of a steel building.

Eave Trim - 20' 2" length

Drip Header Jamb Trim - 20' 2" length

Outside Corner Trim - 20' 2" length

Gutter Trim - 20' 2" length

Gable Trim - 20' 2" length

Technical drawing of a steel jamb trim designed to finish overhead door and window openings.

Jamb Trim with 'J' - 20' 2" length

Technical drawing of a steel gutter bracket used to support commercial rain gutter systems.

Gutter Bracket - 1 1/2" wide

Engineering drawing of a steel base trim installed where wall panels meet the building foundation.

Base Trim - 20' 2" length

Technical drawing of a steel drip header trim used above doors and windows.

Drip Header Trim - 20' 2" length

'J' Trim - 20' 2" length

Cross-sectional drawing of an alternate J trim for steel building wall panel installations.

'J' Trim - 20' 2" length

Bolts

Galvanized A325 structural bolt assembly with nut and washer for connecting steel building framing members.

3/4" x 3" A325 Bolt Assembly - 20 ct.

Galvanized A325 structural bolt assembly with nut and washer for connecting steel building framing members.

3/4" x 3 3/4" A325 Bolt Assembly - 20 ct.

Galvanized A325 structural bolt assembly with nut and washer for connecting steel building framing members.

3/4" x 2 1/4" A325 Bolt Assembly - 20 ct.

Galvanized A325 structural bolt assembly with nut and washer for connecting steel building framing members.

1/2" x 3" A325 Bolt Assembly - 20 ct.

Fin neck bolt with washer designed for fastening steel building roof and wall systems.

1/2" x 1 1/4" Fin Neck Bolt Assembly - 20 ct.

Fin neck bolt with washer designed for fastening steel building roof and wall systems.

1/2" x 1 1/2" Purlin Bolt Assembly - 20 ct.

Galvanized A325 structural bolt assembly with nut and washer for connecting steel building framing members.

1/2" x 1 1/2" A325 Bolt Assembly - 20 ct.

Screws

Self-drilling stitch screw with sealing washer for fastening overlapping metal panels.

14-14 x 7/8" Self-Drill With Washer
(Stitch Screw) - 500 ct.

Self-drilling stitch screw with sealing washer for fastening overlapping metal panels.

12-14 x 1 1/4" Self-Drill with Washer - 500 ct.

Self-drilling stitch screw with sealing washer for fastening overlapping metal panels.

12-14 x 1 1/2" Self-Drill with Washer
(Structural Screw) - 500 ct.

Hex-head self-drilling screw with washer for attaching steel roof and wall panels.

12 x 1 1/4" Hex Flange Self-Drill - 500 ct.

Self-drilling stitch screw with sealing washer for fastening overlapping metal panels.

1/4-14 x 1 1/4" Self-Drill with Washer - 500 ct.

10 x 1" Pancake Head - 500 ct.

Hex-head self-drilling screw with washer for attaching steel roof and wall panels.

1/4-14 x 1" Self-Tap with Washer - 500 ct.

Self-drilling shoulder screw designed for attaching steel building components with precision.

1/4-14 x 1 1/4" Self-Drill Shoulder Screw - 500 ct.

Bracing

Steel cable wind bracing assembly with turnbuckles used to stabilize pre-engineered steel buildings.

Wind Bracing - Cable Hardware

Donobrace rigid steel bracing system installed between structural framing members to improve building stability.

donobrace

S-5! LIST

Rail-less solar mounting system attached to a standing seam metal roof using S-5! clamps.

PVKIT® Rail-Less Metal Roof Solar Mount

S-5! has introduced a new and improved PVKIT, with an improved installation experience for PV mounting technology. The kit comes preassembled for easier and more efficient installation. The PVKIT 2.0 features bonding teeth, which are more aggressive to secure a better ground path.

ProteaBracket roof attachment mounted to a standing seam metal roof for solar and rooftop equipment.

ProteaBracket™

The S-5! ProteaBracket is a versatile bracket for mounting solar PV to trapezoidal roof profiles. This bracket features an adjustable attachment base and module attachment options to accommodate different roof profile dimensions and mounting options.

VersaGard snow retention bracket installed on a standing seam metal roof.

VersaGard™

The S-5! VersaGard is a metal roof bracket used for both PV installation and snow retention on exposed-fastened metal roofs. VersaGard functions as an L-Foot and mounting base in one component for PV rail mounting. Used with side-bolted rail systems, VersaGard can be installed either parallel or perpendicular to slope for portrait or landscape module orientation.

DualGard snow retention system mounted across a standing seam metal roof to control snow movement.

DualGard™

The S-5! DualGard is a two-pipe, 1” (25 mm) diameter aluminum snow bar system that can be powder-coated or anodized to match your roof if desired. It can be used on almost any standing seam metal roof, in addition to corrugated and most trapezoidal exposed-fastened roof profiles.

Heavy-duty X-Gard snow guard system installed on a standing seam steel roof.

X-Gard™ 2.0

X-Gard 2.0 provides that heavy-duty, engineered assurance your building may need. This two-pipe, snow guard system is easily retrofitted to existing roofs or can be incorporated in new construction design. X-Gard’s proprietary 8-sided NEX® 2” pipe provides superior beam strength compared to other crossmembers. Its unique pipe shape is formed from high-tensile aluminum.

Pipe-style X-Gard snow retention system mounted to a metal roof using S-5! clamps

X-Gard™ 1.0

X-Gard 1.0 is a clamp on snow guard for metal roofs designed for maximum load/span conditions, making it a great solution for both light and heavy-duty snow-load applications. X-Gard 1.0 utilizes the ultra-strong NEX® crossmember making it the most heavy-duty, one-pipe system currently available in the marketplace.

ColorGard snow retention system installed on a green standing seam metal roof to prevent snow slides.

ColorGard® Snow Retention

he S-5! ColorGard dramatically reduces risks associated with rooftop avalanches and helps maintain the clean, colourful appearance of the roof with perfect colour and finish matching. ColorGard is mechanically attached with patented S-5! clamps. The clamps are precision-machined from aircraft-quality, high-tensile aluminum—not cast or plastic.

bottom of page